The panoramic design of the Schüco ASS 77 PD sliding system is distinguished by its minimal profile face widths from 37 mm in the interlock section and an outer frame and vent frame concealed in the attachment to building structure. The system not only looks good, it also meets the highest requirements in terms of ease of use and security. Automatic drive and lock technology integrated in the profile maximises user comfort. A high level of security is provided by the integrated finger-trap protection and the infrared light curtains embedded in the ceiling for monitoring the entrance area. The intelligent sensor technology ensures maximum comfort and security to resistance class 4.
The Schüco ASS 77 PD.HI (High Insulation) sliding system is very easy to use, has almost limitless design options and provides the highest level of transparency. A highly effective combination of aluminium and different types of plastic provides superb thermal insulation from Uw = 1.0 W/(m²K). The advanced Schüco ASS 77 PD.HI manual sliding system sets new standards with an integrated vent-height pull grip. The sliding system therefore offers both user comfort and an attractive vent design.
| Properties | Standard | Value / class |
| Depth of outer frame | ----- | 197 mm (double rail) |
| Depth of sash frame | ----- | 77mm |
| Minimum front width | ----- | 37 mm |
| Opening | ----- | Slide |
| Maximum glazing thickness | ----- | 50 mm |
| Maximum weight of the sash | ----- | 300 kg |
| Max. width and height of sash | ----- | 3200x3000mm |
| Number of rails | ----- | 2 |
| Colour finish | ----- | Powder coating, Anodizing |
| Magnetic sensors | ----- | No |
| Resistance to wind load | EN 12210 | Class B2/C2 |
| Wateproofness | EN 12208 | Class 8A |
| Air permeability | EN 12207 | Class 4 |
| Sound reduction Rw,p | EN ISO 140-3 | up to 37dB |
| Resistance to burglary | EN 1627 | up to RC2 |
| Heat transfer coefficient of frame UF | EN ISO 10077-2 | 3.81) W/m2K |
| Heat transfer coefficient of window Uw | EN ISO 10077-1 | 1.62) , 1.23)W/m2K |
1) the front width of the frame and leaf 90 mm and sash/sash 37mm
2) when the diameter of the HS portal is 4000×2500 mm, glazing refers to Ug = 1.1 W/m2K and Swisspacer Advance spacer bar is (Ψ = 0.047 W/mK)
3) when the diameter of HS portal is 4000×2500 mm, glazing refers to Ug = 0.6 W/m2K and Swisspacer Ultimate spacer bar is (Ψ = 0.031 W/mK)
K dispozícii je tepelnoizolačné 2-sklo s nízkoemisívnou vrstvou (low-E). Parametre skla pri skladbe FLOAT4 - 16 - 4lowE: Ug = 1,1 W/m2K (podľa EN 673), stupeň emisivity low-E vrstvy = 0,03, prestup svetla: TL = 82%, celkový prestup energie (solárny faktor) g = 65%, teplý dištančný rámik "warm edge" Swisspacer Advance, plnenie argónom 90%. Viac o skle sa dočítate v našom blogu.
Štandardom sa u nás stalo tepelnoizolačné 3-sklo s nízkoemisívnymi povlakmi SGG Planitherm XN (low-E). Vlastnosti tohto skla sú výborné: Koeficient prechodu tepla Ug=0,6 W/m2K, solárny faktor g=54%, prestup svetla TL=74%. Plnenie argónom na 90%, stupeň emisivity povlaku SGG Planitherm XN je 0,03. Zasklenie je dodávané s dištančným rámikom SGG SWISSPACER, alebo SGG SWISSPACER ULTIMATE, ktorý má momentálne najlepšie parametre na trhu. Viac o skle sa dočítate v našom blogu.
Mnohokrát sa stane, že do jednej skladby skla treba “napratať“ viacero vlastností skla, ako napr. požiadavky na tepelnú izoláciu, ochranu pred slnom a tepelnými ziskami, bezpečnosť proti vlámaniu, bezpečnosť proti poraneniu osôb, bezpečnosť proti prepadnutiu, ochranu pred zvýšeným hlukom, nepriehľadnosť skla, estetiku vo forme ornamentových skiel, farbu skla, či samočistiacu schopnosť zasklenia. Sklá s viacerými vlastnosťami sa nazývajú multifunkčné sklá a aby sa dali ponúknuť, je nevyhnutná znalosť problematiky a zdatný dodávateľ skla. Oba predpoklady v Aluplaste máme :-)
