SCHÜCO ADS 70 HD (Heavy Duty) aluminum entrance door is made from robust and massive HD profiles. They are therefore mainly used in public buildings with high operational loads and large clear widths. The door is standardly equipped with an automatic 6-point lock which increases the resistance to burglary significantly, minimizes the use of the key, improves the door tightness in the unlocked state and acts against the deformation of the leaf due to the bi-metallic effect.
Additional options:
Get inspired by our partners´ offer of panels:
Are you interested in this system?
Additional information (brochures for download):
| Properties | Standard | Value / class |
| Depth of outer frame | ----- | 70 mm |
| Depth of sash | ----- | 70mm |
| Minimum front width | ----- | 147 mm |
| Direction of opening | ----- | Inward, outward |
| Maximum glazing thickness | ----- | 52 mm |
| Colour of finish | ----- | powder coating, anodizing |
| Single-sided atachment panel | ----- | possible |
| Double-sided atachment panel | ----- | possible |
| Resistance to wind load | EN 12210 | class 2 |
| Waterproofness | EN 12208 | class 5A |
| Air permeability | EN 12207 | class 4 |
| Sound insulation Rw | EN ISO 140-3 | up to 43 dB |
| Burglar resistance | EN 1627 | up to RC3 |
| Heat transfer coefficient of frame Uf | EN ISO 10077-2 | 2.31) W/m2K |
| Heat transfer coefficient of window Ud | EN ISO 10077-1 | 1.62); 1.33)W/m2K |
1) front width of frame and leaf 147 mm
2) when the dimension of the door is 1100×2200 mm, glazing refers to Ug=1.1 W/m2K and Swisspacer Advance plastic spacer is (Ψ = 0.047 W/mK)
3) when the dimension of the window is 1100×2200 mm, glazing refers to Ug=0.6 W/m2K and Swisspacer Advance plastic spacer is (Ψ = 0.042 W/mK)
We standardly use visible three part barrel door hinges SCHÜCO for the doors. As an option, however, we can offer also concealed door hinges from SCHÜCO or Siegenia.
Automatic locks are used standardly. After closing, the lock automatically presses the leaf against the frame in three points and thus improves the waterproofness, airtightness and at the same time prevents from deformation of the door leaf due to the Bi-metallic effect. At the same time, the lock essentially increases the resistance of the door to the burglary in a locked and unlocked condition.
There is thermal and insulation double glazing with low-emissive coating (low-E) available a well. The parameters of glass: sturcture FLOAT4 - 16 - 4lowE, Ug = 0.1 W/m2K (according to EN 673), the emissivity value of low-E layer = 0.03, light transmission: TL = 82%, total energy transfer (solar factor) g = 65%, warm spacer SGG SWISSPACER ADVANCE, argon filling 90%.
We standardly offer thermal insulation triple glazing with SGG Planitherm XN (low-E) low emissivity coating. This glazing has excelllent properties: heat transfer coefficient Ug = 0.6 W/m2K, solar factor g = 54%, light transmission TL = 74%. Filled with argon to 90%, the of emissivity coating is 0.03. The glazing is supplied with SGG SWISSPACER spacer or SGG SWISSPACER ULTIMATE spacer which currently have the best parameters on the market .
It is often necessary to “stuff” the composition of only one kind of glass with a number of properties. In addition to energy requirements (thermal insulation, sun protection, and heat gains), we often impose on glass also requirements for safety (protection against burglary, protection against injury), aesthetic (ornaments, colours, opaque) or functional (noise protection, self-cleaning property). Glass simultaneously meeting multiple requirements is called multifunctional glass and to put it on offer requires the knowledge of the subject and a proficient supplier of glass. Luckily, we meet both of these precondition in Aluplast :-)
Doors need not only be controlled traditionaly, i.e. with a key. To increase the comfort when opening the door, we provide with a set of following options: biometric fingerprint reader, smart card reader, code keypad, or remote control. Imagine all this in combination with an automatic lock with electromotive drive.
If you wish to bring together service, functional, and aesthetic door systems - all in one place, Schüco Door Control System (DCS) platform is available for you. We provide you with a choice of systems, such as fingerprint reader, code keypad, microphone, speaker, the motion sensor, LED lights, video door control, or house number.
When choosing the design of your door, we offer you two alternatives: a) a door made at workshop when upon your decision and agreed design, the leaf is devided with stiles into panels of various shapes. These can be filled with glass, or full sandwich panel of an individual choice; b) the leaf is filled with an original door panel of your choice (provided by our partners Adeco, Gava). Three types of door panels are possible: infill panel, single-sided attachment panel or double-sided attachment panel.
There are roughly 300 RAL shades and anodizers of choice. Basic shades of colours according to RAL are alternatively offered we as glossy, matt, and with fine structure (Feinstruktur). It is also possible to choose from a number of special pearly colours, with a metallic effect, INOX optical effect, or wood-like coating.
