SCHÜCO ADS 65 HD

SCHÜCO ADS 65 HD (Heavy Duty) aluminum entrance door is made from robust and massive HD profiles. They are therefore mainly used in public buildings with high operational loads and large clear widths. The door is standardly equipped with an automatic 6-point lock which increases the resistance to burglary significantly, minimizes the use of the key, improves the door tightness in the unlocked state and acts against the deformation of the leaf due to the bi-metallic effect.

Additional options:

  • The possibility to use an automatic (drop) threshold
  • The possibility to use concealed door hinges
  • The possibility to use overlapping door panels of the leaf
  • The possibility to use anti-panic fitting according to EN 1125 and EN 179

Get inspired by our partners´ offer of panels:

Are you interested in this system?

Additional information (brochures for download):

red
red
red
red
red
red
red
red
red
red
red
red

Technical Data

Properties Standard Value / class
Depth of outer frame ----- 65 mm
Depth of sash ----- 65 mm
Minimum front width ----- 147 mm
Direction of opening ----- Inward, outward
Maximum glazing thickness ----- 45 mm
Colour of finish ----- powder coating, anodizing
Single-sided atachment panel ----- possible
Double-sided atachment panel ----- not possible
Resistance to wind load EN 12210 class 2
Waterproofness EN 12208 class 5A
Air permeability EN 12207 class 2
Sound insulation Rw EN ISO 140-3 up to 43 dB
Burglar resistance EN 1627 up to RC3
Heat transfer coefficient of frame Uf EN ISO 10077-2 2.31) W/m2K
Heat transfer coefficient of window Ud EN ISO 10077-1 1.62); 1.33)W/m2K

1) front width of frame and leaf 147 mm
2) when the dimension of the door is 1100×2200 mm, glazing refers to Ug=1.1 W/m2K and Swisspacer Advance plastic spacer is (Ψ = 0.047 W/mK)
3) when the dimension of the window is 1100×2200 mm, glazing refers to Ug=0.6 W/m2K and Swisspacer Advance plastic spacer is (Ψ = 0.042 W/mK)

Type of fitting

Automatic door locks

Automatic locks are used standardly. After closing, the lock automatically presses the leaf against the frame in three points and thus improves the waterproofness, airtightness and at the same time prevents from deformation of the door leaf due to the Bi-metallic effect. At the same time, the lock essentially increases the resistance of the door to the burglary in a locked and unlocked condition.

Additional door accessories

Depending on how the door is meant to be used, it is possible to chose some suplementary accessories. There are various types of locks, handles, cranks, self-closing devices, or electric door control.

Glass type

Thermal insulation double glazing (Ug = 1.1 W/m2.K)

There is thermal and insulation double glazing with low-emissive coating (low-E) available a well. The parameters of glass: sturcture FLOAT4 - 16 - 4lowE, Ug = 0.1 W/m2K (according to EN 673), the emissivity value of low-E layer = 0.03, light transmission: TL = 82%, total energy transfer (solar factor) g = 65%, warm spacer SGG SWISSPACER ADVANCE, argon filling 90%.

Multifunctional glazing

It is often necessary to “stuff” the composition of only one kind of glass with a number of properties. In addition to energy requirements (thermal insulation, sun protection, and heat gains), we often impose on glass also requirements for safety (protection against burglary, protection against injury), aesthetic (ornaments, colours, opaque) or functional (noise protection, self-cleaning property). Glass simultaneously meeting multiple requirements is called multifunctional glass and to put it on offer requires the knowledge of the subject and a proficient supplier of glass. Luckily, we meet both of these precondition in Aluplast :-)

More for your design

Door panel (infill, singel-sided or double-sided)

When choosing the design of your door, we offer you two alternatives: a) a door made at workshop when upon your decision and agreed design, the leaf is devided with stiles into panels of various shapes. These can be filled with glass, or full sandwich panel of an individual choice; b) the leaf is filled with an original door panel of your choice (provided by our partners Adeco, Gava). Three types of door panels are possible: infill panel, single-sided attachment panel or double-sided attachment panel.

Colours on offer

There are roughly 300 RAL shades and anodizers of choice. Basic shades of colours according to RAL are alternatively offered we as glossy, matt, and with fine structure (Feinstruktur). It is also possible to choose from a number of special pearly colours, with a metallic effect, INOX optical effect, or wood-like coating.