SCHÜCO ADS 90.SI (Super Insulation) aluminium door is characterized by a unique mechanical and energy characteristics which makes it ideal to be installed in residential buildings with high energy standards. Broader thermal insulation zone, consistent thermal bridge break, sophisticated rebate and mid gaskets, and a special thermal insulating insert around the glazing allow the product reach excellent sysystem properties, such as the waterprooofness referring to up to class 7A (750Pa), or UF = 1.4 W/m2K. With high quality tripple glazing, or overlapping door fill, the door achieves UD = 1.0 W/m2K what means that they meets the future energy standard already today.
Get inspired by our partners´ offer of door panels:
Are you interested in this product?
Additional information (brochures for download):
| Properties | Standard | Value / class |
|---|---|---|
| Depth of outer frame | ----- | 90 mm |
| Minimum front width | ----- | 147 mm |
| Direction of opening | ----- | inward or outward |
| Maximal glazing thickness | ----- | 68 mm |
| Door panel with one-sided overlap | ----- | yes |
| Door panel with both-sided overlap | ----- | yes |
| Suitability for passive houses | ----- | yes |
| Colour finish | ----- | powder coating, anodizing |
| Resistance to wind load | EN 12210 | class 4/C3 |
| Waterproofness | EN 12208 | class 7A |
| Air permeability | EN 12207 | class 2 |
| Sound reduction Rw,p | ----- | not defined |
| Resistance to burglary | EN 1627 | up to RC3 |
| Heat transfer coefficient of frame UF | EN ISO 10077-2 | 1.41) W/m2K |
| Heat transfer coefficient for doors UD | EN ISO 10077-1 | 1.02) W/m2K |
1) front width of frame and sash 147 mm
2) when the dimension of the door is 1000 × 2100 mm, glazing refers to Ug=0.6 W/m2K and a plastic spacer Swisspacer Ultimate is (Ψ = 0.031 W/mK)
We standardly use visible three part barrel door hinges from SCHÜCO for the doors. As an option, however, we can offer also concealed door hinges SCHÜCO or Siegenia.
Automatic locks are used standardly. After closing, the lock automatically presses the leaf against the frame in three points and thus improves the waterproofness, airtightness and at the same time prevents from deformation of the door leaf due to the Bi-metallic effect. At the same time, the lock essentially increases the resistance of the door to the burglary in a locked and unlocked condition.
We standardly offer thermal insulation triple glazing with SGG Planitherm XN (low-E) low emissivity coating. This glazing has excelllent properties: heat transfer coefficient Ug = 0.6 W/m2K, solar factor g = 54%, light transmission TL = 74%. Filled with argon to 90%, the emissivity of coating is 0.03. The glazing is supplied with SGG SWISSPACER ADVANCED spacer or SGG SWISSPACER ULTIMATE spacer which currently have the best parameters on the market.
It is often necessary to “stuff” the composition of only one kind of glass with a number of properties. In addition to energy requirements (thermal insulation, sun protection, and heat gains), we often impose on glass also requirements for safety (protection against burglary, protection against injury), aesthetic (ornaments, colours, opaque) or functional (noise protection, self-cleaning property). Glass simultaneously meeting multiple requirements is called multifunctional glass and to put it on offer requires the knowledge of the subject and a proficient supplier of glass. Luckily, we meet both of these precondition in Aluplast :-)
Doors doesn’t need to be controlled only traditionaly, i.e. with a key. To increase the comfort we offer a set of following options: biometric fingerprint scanner, card reader, code keypad, or remote control. All this in combination with an automatic lock with electromtoric drive.
If you wish to bring together service, functional, and aesthetic door systems - all in one place, SCHÜCO Door Control System (DCS) is available for you. We provide you with a choice of modules, such as fingerprint scanner, code keypad, microphone, speaker, the motion sensor, LED lights, video door control, or house number.
When choosing the design of your door, we offer you two alternatives: a) a door made at workshop when upon your decision and agreed design, the leaf is devided with stiles into panels of various shapes. These can be filled with glass, or full sandwich panel of an individual choice; b) the leaf is filled with an original door panel of your choice (provided by our partners Adeco, Gava). Three types of door panels are possible: infill panel, single-sided attachment panel or double-sided attachment panel.
There are roughly 300 RAL shades and anodizers of choice. Basic shades of colours according to RAL are alternatively offered we as glossy, matt, and with fine structure (Feinstruktur). It is also possible to choose from a number of special pearly colours, with a metallic effect, INOX optical effect, or wood-like coating.
